Stay A Sleep - Fitted Cot Bumper

Baby Pink	Sky Blue
Baby Pink	The 3 Bumper Colours
Baby Pink	Solid End Bumper (Classic White Only)
Solid End Bumper (Classic White Only)	Baby BittZa Bag
Baby BittZa Bag	Bath Stickers

1. Remove bumper form Packaging and dispose of immediately.  This bag is not a toy and should be kept out of reach of children.

2. Place the bumper inside the cot with the fitted sheet base resting on the mattress.  Ensure the wraps are facing outwards with the small mesh pieces in the middle of the head and foot of the cot and the long mesh pieces along the long sides of the cot.

3. Lift each corner of the mattress and place fitted bumper sheet underneath.  Ensure the bottom of the padded sections is level with the top of your cots mattress.

4. Using the wraps, attach the bumper to the four main corners of your cot making sure they are secured well and pulled tight. Tuck any excess material around the back of the cot bars.

5. Once the main corners are secure attach the mid section wraps to the exterior bars of the cot.

Installation Trouble Shooting

Q. The wraps do not seem to attach around the corner panels of the cot.
A. Check that you have the bumper sitting in the cot with the short mesh pieces in the middle of the head and foot of the cot.  You should also refer to the above Gallery pictures on the web site and if you are still having problems e-mail a picture of the bumper through to our e-mail address This e-mail address is being protected from spam bots, you need JavaScript enabled to view it   for advice.

Q. I have a Solid End bumper and the wraps do not seem to meet at the solid end of the cot.
A. Check that you have the bumper sitting in the cot with the short mesh pieces in the middle of the head and foot of the cot.  The end wraps on a solid end bumper are extra long.  Feed both wraps out from the very last slat on the long side of the cot to meet at the middle of the solid ends of the cot.  You should also refer to the above Gallery pictures on the web site and if you are still having problems e-mail a picture of the bumper through to our e-mail address This e-mail address is being protected from spam bots, you need JavaScript enabled to view it   for advice.